How to Add All Symbols in Velocity & in Amibroker in One Go:

Step 1: Open Velocity >> Click on Symbols


Step 2: Then from drop down list >> select Add Symbols / List


Step 3: Now you will get Symbol list window


Step 4: Copy and Paste all symbols in the blank option and click on Finish button


Step 5: Now you will see all the symbols that you have added as Active Symbols


Step 6: Right click with mouse in Velocity and you will get an Combo Box (as shown in below image) >> Click on Update from feed


Step 7: Now open Amibroker


Step 8: Click on File >> from drop down menu, select Database settings


Step 9: Now click on Configure


Step 10: Then, click on Update all active symbols button


Step 11: Wait till you get a message saying >> Update is finished, then click on OK button


Step 12: Now you will see all the symbols has been updated on the left hand side in Amibroker.


Step 13: Click on any symbol >> E.g. BANKNIFTY-I and wait for the chart to load up >> Once the chart is loaded, make sure the Base time shows 15m >> if not, then select 15-minute from the drop down menu (you case select Base time as per your requirements. E.g. 15-minute or 5-minute or 1 minute, etc.)


Once all the steps are followed as mentioned above, you will be able to ADD all Symbols in Velocity and in Amibroker in One Go.

In case you need any assistance, please contact our LiveChat support team.

Is article helpful?